eneneses
For water cisterns
For water cisterns
No items found.

Level Sensor and Monitor for Rainwater Tanks: EcoMeter S

Proteus EcoMeter S

$169.90 
This genius level indicator designed for cisterns and rain water storages can be installed in just a few minutes, without the need for wiring
The ultrasound sensor is battery operated and connected via a radio transmitter to the monitor!
Installation on all fuel oil and oil tanks in minutes with no technical knowledge.
No wiring necessary.
Contactless level measurement with ultrasound means no mechanical parts in the heating water tank
Suitable for home as well as factory use.
The Proteus EcoMeter with an additional approx. 9 metres of cable between the sensor and the receiver unit. Designed for areas where radio waves could be blocked like concrete cisterns, underground tanks, etc.

Proteus EcoMeter PLUS

$199.00 
El Proteus EcoMeter con unos 9 metros de cable adicional entre el sensor y la unidad receptora. Diseñado para áreas donde las ondas de radio podrían bloquearse como cisternas de hormigón, tanques subterráneos, etc.

Proteus EcoMeter PLUS

$199.00 

Product Details

Detalles de producto

What’s a Rich Text element?

The rich text element allows you to create and format headings, paragraphs, blockquotes, images, and video all in one place instead of having to add and format them individually. Just double-click and easily create content.

Static and dynamic content editing

A rich text element can be used with static or dynamic content. For static content, just drop it into any page and begin editing. For dynamic content, add a rich text field to any collection and then connect a rich text element to that field in the settings panel. Voila!

How to customize formatting for each rich text

  • Headings, paragraphs
  • Headings, paragraphs
  • Headings, paragraphs
  • Headings, paragraphs

Ultrasonic wireless water level gauge for rainwater tanks and cisterns

Proteus EcoMeter S is an ultrasonic liquid level sensor, battery powered and equipped with a digital radio transmitter. This device has been developed especially for water tanks, rainwater and cisterns - but it can also be used for continuous measurement of the fuel tanks content (eg. diesel). The intelligent algorithm responds quickly to level changes in the tank (e.g. during refilling of water or fuel several times per day, or when pumping the tank content out).

To ensure maximum battery life, the sensor sends measurement data to the receiving station every 30 minutes. Measurements are also provided in real time, but as soon as the detected change in the level of a tank is ≥ 1 1/5" / min.

EcoMeter S is a modern and precise alternative to mechanical dipsticks and content meters of water tanks, barrels and cisterns with a maximum capacity of 5300 Gallons, offering a measurement range of up to 9 9/10". The sensor communicates wirelessly with digital radio station within range up to 500ft.

Advantages of Proteus EcoMeter S

  • Accuracy to 10 times higher than for comparable measurement systems (+/- 8/10")
  • Range up to 500ft
  • No wiring, specialized knowledge not needed
  • Wireless data transmission, no cable needed
  • Measuring range up to 10ft (maximum ultrasonic signal range)
  • Can be used in all standard tanks und cisterns, regardless of its manufacturer or the material tank is built from
  • Sensor suitable for outdoor use, resistant to water splashes
  • Installation and configuration of the device takes just a few minutes
  • Suitable for use with underground cisterns and tanks or inaccessible areas
  • Lifetime of a sensor battery is 2-3 years
  • Basement tanks, underground tanks, concrete tanks and cisterns, outdoor tanks or battery tanks
  • For specialized applications or further assistance, please contact customer service

Main features of the EcoMeter S and EcoMeter S Plus

  • Ultrasonic level sensor with integrated radio transmitter (non-contact sensor, non-mechanical parts)
  • Digital radio transmitter (range up to 500ft)
  • Measures tanks up to 5300 Gallons, measuring range up to 9 9/10"
  • Normal mode: Monitor receives and processes data in 30 min intervals
  • Fast Mode: Monitor receives measurement data in real time at level change of ≥1 1/5"/min
  • Fits standard 2", 1¼" and 1½" threaded openings
  • Indication of the liquid level in centimeters
  • Indication of the liquid level in liters and percent
  • A graphical representation of the tank using a bar graph (sensor and monitor)
  • Ambient temperature
  • Cold weather warning
  • Low level warning
  • Battery status alarm
  • Free customer service online and by phone

Optional antenna extension (EcoMeter S PLUS)

An additional cable with a length of about 30ft between the sensor and wireless module allows you to install the sensor in underground tanks and cisterns, manway opening or hard to access and radio dead areas

(e.g. behind thick walls, heavy lids or shafts/manway openings at depths greater than 8" below ground level).
It also allows for the installation of the sensor in the radio dead areas, thereby extending the effective working range of the monitor. EcoMeter PLUS is thus able to provide a stable connection between the sensor and monitor at depths in excess of 8" and in places covered with heavy metal or concrete covers blocking the radio signal.

Further technical features

  • Measures tanks up to 5300 Gallons, measuring range up to 10ft (max. hight of tank
  • CO2 emissions in kgCO
  • Consumption in liters
  • Displays remaining volume in liters and percent
  • Graphic representation of the tank using a bar graph (sensor and monitor)
  • Fits standard 2", 1¼" and 1½" threaded openings
  • Measures with 10mm accuracy
  • USB Firmware upgrade
  • CE, RoHS, WEEE
  • Wireless tank level monitoring with range of approx. 500ft
  • Antenna extension available for hard to access and underground applications room"
  • Normal mode: Monitor receives and processes data in 60 min intervals
  • Digital radio transmitter has range of up to 500ft
  • Carbon Footprint Reports

Specifications

Especificaciones

What’s a Rich Text element?

The rich text element allows you to create and format headings, paragraphs, blockquotes, images, and video all in one place instead of having to add and format them individually. Just double-click and easily create content.

Static and dynamic content editing

A rich text element can be used with static or dynamic content. For static content, just drop it into any page and begin editing. For dynamic content, add a rich text field to any collection and then connect a rich text element to that field in the settings panel. Voila!

How to customize formatting for each rich text

  • Headings, paragraphs
  • Headings, paragraphs
  • Headings, paragraphs
  • Headings, paragraphs

Transmitter

Dimensions
70mm (W) x 40mm (L) x 142mm (H) ± 1mm
Weight
93g
Housing material
UV Stabilized polypropylene
Operating temperature
-10°C to 60°C (Note 1)
Storage temperature
-20°C to 60°C (Note 1)
Altitude range
< 2km above sea level
Environmental protection
IP67 – outdoors
Radio frequency
914.5 MHz FM
Radio output power
0dBm ± 2dBm
Receiver sensitivity
n/a
Ultrasonic range
> 12cm to < 3m (Note 2)
Ultrasonic signal diversion
30° (Note 3)
Material compatibility
(Note 4)
Power requirements
VARTA CR2450 3V Li-Manganese dioxide / organic electrolyte (fitted)
Battery life
> 5 years
Humidity range
15% to 95%
LCD display
10 level bar graph with refill/error icons
Full detection LCD
Red LED flashes when rising level is detected and within 20cm of sensor
Ultrasonic resolution
± 1cm
Accuracy
Typically ± 2cm from 12cm to 3m
Note 1: Storage and operation above 20°C may reduce battery life.
Note 2: Based on a measurement to a flat liquid target of size 30cm2.
Note 3: The maximum spatial diversion of the ultrasonic signal will be < 30° from the central axis of the transducer.
Note 4: Suitable for use in tanks for the storage of water diesel fuel, kerosene, AdBlue, gas oil types A2,C1,C2 and D as defined by BS2869.

Display receiver (with mains plug)

Dimensions
50mm (W) x 51mm (D) x 135mm (H) 3mm
Weight
60g
Housing material
ABS
Operating temperature
0°C to 50°C
Storage temperature
-20°C to 60°C
Altitude range
< 2km above sea level
Environmental protection
IP44 indoors only
Radio frequency
n/a
Radio output power
n/a
Receiver sensitivity
-100dBm to -110dBm @ 0.001 BER
Ultrasonic range
n/a
Ultrasonic signal diversion
n/a
Material compatibility
n/a
Power requirements
115V AC 60Hz, 30mA
Battery life
n/a
Humidity range
0% to 95%
LCD display
Multi-purpose
Full detection LCD
n/a
Ultrasonic resolution
n/a
Accuracy
n/a

Adapter

2", 1 1/2" and 1 1/4" BSP thread multi-thread mounting adapter, 70mm (W) x 49mm (D) x 27mm (H) – (included with European versions) 2" NPSM external thread adapter, 79mm (W) x 70mm (D) x 16mm (H) – optional

Gasket (included)

Material EPDM, 70mm (W) x 40mm (D) x 4mm (H) ± 1mm
Distance between hole centers 50mm ± 1mm

Screws (included)

No.8 X 19mm panhead Pozi-drive stainless steel

Bund switch option

Can be supplied with bund switch for double-skinned tanks – 3m cable

Specifications

Especificaciones

What’s a Rich Text element?

The rich text element allows you to create and format headings, paragraphs, blockquotes, images, and video all in one place instead of having to add and format them individually. Just double-click and easily create content.

Static and dynamic content editing

A rich text element can be used with static or dynamic content. For static content, just drop it into any page and begin editing. For dynamic content, add a rich text field to any collection and then connect a rich text element to that field in the settings panel. Voila!

How to customize formatting for each rich text

  • Headings, paragraphs
  • Headings, paragraphs
  • Headings, paragraphs
  • Headings, paragraphs

Transmisor

Dimensiones
70mm (ancho) x 40mm (largo) x 142mm (alto) ± 1mm
Peso
93g
Material de la carcasa
Polipropileno estabilizado con UV
La temperatura de funcionamiento
-10°C to 60°C (Nota 1)
Temperatura de almacenamiento
-20°C to 60°C (Nota 1)
Rango de altitud
< 2km sobre el nivel del mar
La protección del medio ambiente
IP67 - al aire libre
La frecuencia de radio
914.5 MHz FM
La potencia de salida de la radio
0dBm ± 2dBm
Sensibilidad del receptor
n.d.
Rango ultrasónico
> 12cm to < 3m (Nota 2)
Desviación de la señal ultrasónica
30° (Nota 3)
Compatibilidad de materiales
(Nota 4)
Requerimientos de energía
VARTA CR2450 3V Dióxido de Li-Manganeso / electrolito orgánico (equipado)
La vida de la batería
> 5 años
Rango de humedad
15% a 95%
Pantalla LCD
Gráfico de barras de 10 niveles con iconos de recarga/error
Detección completa de LCD
El LED rojo parpadea cuando se detecta el aumento del nivel y dentro de los 20 cm del sensor
Resolución ultrasónica
± 1cm
Precisión
Típicamente ± 2cm de 12cm a 3m
Nota 1: El almacenamiento y el funcionamiento por encima de los 20°C pueden reducir la duración de la batería.
Nota 2: Basado en una medición a un objetivo de líquido plano de tamaño 30cm2.
Nota 3: La máxima desviación espacial de la señal ultrasónica será < 30° del eje central del transductor.
Nota 4: Adecuado para su uso en tanques de almacenamiento de combustible diesel de agua, queroseno, AdBlue, gasóleo de los tipos A2,C1,C2 y D según la definición de BS2869.

Receptor de pantalla (con enchufe de red)

Dimensiones
50mm (ancho) x 51mm (largo) x 135mm (alto) ± 3mm
Peso
60g
Material de la carcasa
ABS
La temperatura de funcionamiento
0°C a 50°C
Temperatura de almacenamiento
-20°C a 60°C
Rango de altitud
< 2km sobre el nivel del mar
La protección del medio ambiente
IP44 sólo en interiores
La frecuencia de radio
n.d.
La potencia de salida de la radio
n.d.
Sensibilidad del receptor
-100dBm to -110dBm @ 0.001 BER
Rango ultrasónico
n.d.
Desviación de la señal ultrasónica
n.d.
Compatibilidad de materiales
n.d.
Requerimientos de energía
115V AC 60Hz, 30mA
La vida de la batería
n.d.
Rango de humedad
0% a 95%
Pantalla LCD
Multi-propósito
Detección completa de LCD
n.d.
Resolución ultrasónica
n.d.
Precisión
n.d.

Adaptador

Adaptador de montaje multihilo con rosca BSP de 2", 1 1/2" y 1 1/4", 70mm (ancho) x 49mm (profundidad) x 27mm (altura) - (incluido en las versiones europeas) Adaptador de rosca externa NPSM de 2", 79mm (ancho) x 70mm (profundidad) x 16mm (altura) - opcional

Junta (incluida)

Material EPDM, 70mm (ancho) x 40mm (profundidad) x 4mm (altura) ± 1mm
La distancia entre los centros de los agujeros es de 50mm ± 1mm

Tornillos (incluidos)

No.8 X 19mm panhead Pozi-drive de acero inoxidable

Opción de cambio de bund

Puede ser suministrado con un interruptor de bund para tanques de doble piel - 3m de cable

Installation Notes

Notas de instalación

What’s a Rich Text element?

The rich text element allows you to create and format headings, paragraphs, blockquotes, images, and video all in one place instead of having to add and format them individually. Just double-click and easily create content.

Static and dynamic content editing

A rich text element can be used with static or dynamic content. For static content, just drop it into any page and begin editing. For dynamic content, add a rich text field to any collection and then connect a rich text element to that field in the settings panel. Voila!

How to customize formatting for each rich text

  • Headings, paragraphs
  • Headings, paragraphs
  • Headings, paragraphs
  • Headings, paragraphs

Easy 6-Step-Installation

Installation Notes

  • To ensure optimum working conditions, make sure that the Proteus EcoMeter sensor has been installed at a suitable distance from tank walls and obstacles inside tank of at least 6" in order to avoid distortion of the ultrasonic signal.
  • The maximum measurable volume of the tank is 5300 Gallons.
  • The sensor must be mounted directly on the tank cap or the fuel filler cap and must not be mounted on flange longer than 8/10". If possible, remove the nozzle and attach the sensor directly into the threaded opening.
  • Please specify the distance between the sensor opening/membrane and bottom of the tank (= height).
  • Maximum range is 10ft, the ultrasonic sensor can take readings only within this area.
  • Please be aware that some heating oil tanks have certifications, so any modifications (eg. drilling) can be undertaken only by professional staff with relevant license. These objections do not apply to water tanks and cisterns. Please keep all possible implications in mind.
  • The optional antenna extension cable (approximately 30ft between sensor and transmitter) can be separated (at the user's own risk, the guarantee does not cover modified cable).
  • For sensor installed deeper than 8" in the tank or below ground level, the antenna extension (EcoMeter PLUS) must be used.
  • Please download the latest version of the manual before Installation Guide (available below).

Help

Ayuda

YouTube: How does the Proteus EcoMeter work?
YouTube: EcoMeter S Step-by-Step Configuration Tutorial
YouTube: Proteus EcoMeter / EcoMeter S: Useful Installation Tips
YouTube: Proteus EcoMeter / EcoMeter S: Warning Triangle
YouTube: Proteus EcoMeter / EcoMeter S: Battery Replacement Tutorial
Installation Guide EcoMeter S & EcoMeter S Plus
Installation Guide EcoMeter S & EcoMeter S Plus
download now